here is all that I hope is wrong. This is the crankshaft pulley. The nose of the crankshaft looks good, the keyway is still in the slot. I just need to find a new pulley now. I priced one at International Auto Parts so far, 249.00. I am hoping I can find a second hand one on Monday perhaps.
I was driving home the other day and I missed a shift and over revved the alfa. it started making an awful banging noise. At first I thought the clutch was starting to come apart because it shifted really hard and pushing in the clutch seemed to make the throw out bearing squeal. Upon inspection the clutch seemed fine. I took the cam cover off and noticed the timing chain was very loose. I adjusted the tensioner, checked the cam timing and the valve clearance. I put it all back together. The banging noise is not as pronounced now, and only at idle and right above, but it is still there. I checked timing again and when I reached down to try to turn over the engine, I noticed the crank pulley rotated on the crank about 1/4 turn without the crank turning. I pulled out the radiator to get a better look, with frars of the crank nose being broken. I see that the pulley spins on the crank, but the TDC mark on the crank nose is in alignment with TDC measured with a dial gauge on the piston. I have not puuled the pulley off yet, I am hoping I just sheared a keyway and the pulley bouncing back and forth is what the banging noise is. Compression checks out good in all of the cylinders so I do not think I bent any valves.
Anyhow, here are some pictures of the engine and my helper, Xesia, working on it.
I was asked to photograph the Thundering Angels Motorcycle Rally today. Here is a quick glimpse of what I saw.
The girls have to go through the pictures first before I release any more
A friend of my son and his father built this Electric Miata
I was heading home from work friday and I came across this interesting automobile at the gas station.
Here in the Seattle Area, whenever it shows, people freak out
If you want prints or digital images of any of our photographs please let us know so we can bring them with us.
You can find links to the galleries under the Race Gallery Category
My daily driver is a 1988 Alfa Romeo Spider. When I purchased it for a very small amount of money it barely ran.
Since then I have invested way more into the car than it is worth and I am about 1/2 way to being all complete. I cannot say “Finished” because things like this are never “Finished”
So far the engine has been completely rebuilt.
10.4:1 pistons and matching sleeves
.030 shaved head
High flow oil pump
292 duration 10.5mm lift cams
2.5″ side exit exhaust
Etc. Etc. Etc.
It still has the almost stock Bosch (German Relative of Lucas) Fuel Injection which is a future project.
Suspension has been rebuilt by Group 2
Polyurethane bushings throughout
New Idler arms
New tie-rod ends
add lots of Etc’s here also.
The body, well, my youngest son took it out (when he was not supposed to) and while it was parked, someone hit it and took off. So I had a friend rough in the bodywork and I sprayed it again in black in the garage. Not the best of jobs but it works until I get the rest of it more together. Then I can spray it properly.
The Interior, That is what I am working on now. At least I am at the point of putting stuff back
together. I do need to get a roll bar sometime because it does like to oversteer under power.
Well, that is all for now, I will update as I go along and you can sort the updates under the Category Alfa Romeo
I am looking for female models for a 2014 SpeedDealer calendar
Please Contact us if you are interested.
These will be trade for images shoots.
Here are the pages from our 2010 calendar:
Continue reading “Model for 2014 SpeedDealer Calendar”
I took a lot of pictures that I have to sort through yesterday at the Seattle 100 Charities Race Day.
I was not able to obtain a photographers pass so they are taken from the public viewing area, I concentrated mostly on capturing airtime.
The Gallery of all the images I took is here:
I am working on logos for Mechanophelia and I want to use a silhouette of the TZ250 for t-shirts and cards etc. Last night I set up the TZ by the side of the pool and took some shots. Here is one of Xesia with the TZ.
The Gallery of all the images I took is here:
The Full Gallery of images is here:
The full gallery of what I took is here:
I have seen a few articles lately about a few Ferraris I have seen in the past. One sold for around 18 million if I remember correctly and the other is the oldest surviving Ferrari. So I figure I should post some pictures of these particular cars that I have photographed.
The Engine in my Alfa Romeo Spider
I have not really sold my images outright before, it has always been from a gallery showing or an auction etc. So I came up with introductory pricing which can be seen here:
I am open to quantity discounts, and custom work and print sizes can be accommodated.
Motorcycles Race in the rain…